The Yamaha F175A fills a gap in the in the current range of in-line four-cylinder outboards.

NEW YAMAHA FOUR-STROKE OUTBOARDS

Yamaha has announced two new models in Australia: the new F175A and F115B. According to Yamaha, the new F175 fills a gap in the current range of inline four-cylinder outboards, while the F115B will replace the Yamaha F115A

YAMAHA F175

Yamaha says the F175 is based on the award-winning 2.8lt F200 platform, sharing the same displacement and four-cylinder, 16-valve double-overhead-camshaft design. It uses a single-throttle intake valve that is said to reduces weight while increasing efficiency, and a knock sensor allows the engine to run at peak efficiency and performance at a high rev rate regardless of conditions.

The engine has a 50amp electrical output to keep up with today’s electronic accessories. It is also compatible with the Yamaha Command Link gauges and hardware, as well as the Y-COP theft deterrent system. The outboard also includes Yamaha’s Variable Trolling function when fitted with Yamaha’s Command Link gauges.

The F175 is compatible with Yamaha’s Shift Dampening System (SDS) range of propellers. This system utilises a splined rubber hub designed to absorb the force created when an outboard is shifted into gear. The F175 is mechanically controlled for ease of use in both new boat and repower applications.

YAMAHA F115B

Yamaha says the new F115B, at 171kg, is 15kg lighter than the previous generation F115A; Yamaha also says it is 11kg lighter than the nearest four-stroke competitor. Weight savings are derived from a variety of new materials, such as a composite cowling, a single-ram power trim and tilt mechanism, and a new lightweight mounting bracket.

The F115B has increased cubic capacity, which now measures 1.8 litres. The outboard’s Double-Overhead Cam (DOHC) four-cylinder design now has larger intake and exhaust valves for easier breathing, more power and better mid-range torque. The compression ratio has been increased, and so has the full-throttle RPM range – now up to 6,300rpm. A knock sensor allows the engine to operate reliably at peak output. Yamaha says the result is great response throughout the RPM range and terrific acceleration.

The new Yamaha F115 is mechanically controlled and compatible with Yamaha’s Command Link gauges and hardware as well as the Y-COP theft deterrent system. The outboard also includes Yamaha’s Variable Trolling function when fitted with Yamaha’s Command Link gauges or Multi-function Tiller Handle.

Yamaha added that the new F175A outboard will be available from April 2014; the new Yamaha F115B outboard will be available from the beginning of May.

Visit www.yamaha-motor.com.au for more information.

YAMAHA OUTBOARD SPECIFICATIONS

 

YAMAHA F115B

YAMAHA F175A

Model name

F115LB, F115XB, LF115XB

F175LA, F175XA

Shaft length

L, X

L, X

Dry weight

L: 171kg, X: 176kg (dry, no prop weight)

L: 219kg, X: 220kg (dry, no prop weight)

Engine type

Four-Stroke, 16-Valve, DOHC, In-line 4

Four-Stroke, 16-Valve, DOHC, In-line 4

Displacement

1832cc

2785cc

Bore × stroke

81.0 × 88.9

96 x 96.2

Compression ratio

10:1

10.3:1

Full throttle operating range

5300-6300rpm

5000-6000rpm

Fuel induction system

Electronic fuel injection

Electronic fuel injection

Engine oil capacity

3.2 L/3.0 L *with/without oil filter exchange

4.5 L/4.3 L *with/without oil filter exchange

Ignition system

TCI Microcomputer

TCI Microcomputer

Alternator

35 Amp (Battery charge: 28 Amp)

50 Amp (Battery charge: 42 Amp)

Cooling system

Raw-water, thermostatically controlled

Raw-water, thermostatically controlled

Exhaust system

Through propeller hub

Through propeller hub

Emission rating

3 Star Ultra Low Emission

3 Star Ultra Low Emission

Recommended fuel

Regular unleaded

Regular unleaded

Warranty

4 Years Recreational (conditional)

4 Years Recreational (conditional)