Farr 400 Racing Yacht

These boats have enough waterline for fast passagemaking, are sufficiently seaworthy for offshore competition yet require less crew and resources than say a TP52 campaign. In fact the new carbon-hulled Farr 400 has been described as a mini TP52 thanks to big-boat features such as the carbon Lewmar pedestal and similar deck layout with big asymmetric kites - putting the same sail area on a one-tonne lighter hull. Other key attributes that should win her global popularity is portability, as it fits into a 40-foot container and ought to make campaign costs significantly cheaper than running its 15-year-old predecessor, the Farr 40, which remains a popular class in Australia.

However, a changing of the guard is likely with the arrival of the first new 400 into Australia. Hull no.9 was brought to Sydney Harbour earlier in the year by new owners Matt Allen and Walter Lewin to do battle with another hot new boat, McConaghy's MC38, as well as the Kerr 40 and a myriad of First 40s plus other cruiser-racers that ply their regatta trade.

"To grow the class we've tried to do something different with the Farr 400 - the movability to rack it, so it can transfer to anywhere in the world inexpensively," said Shaughnessy.

COCKPIT KIT
First impression of the 400 Ichi Ban, as I helped prepare it for the morning's CYCA Winter Series race on Sydney Harbour, was the cockpit size. The long, wide cockpit is dominated by a central pedestal coffee grinder winch and large carbon tiller, while all running rigging is hidden in gutters, allowing extremely clean decks. Both tiller and twin-wheel steering is available, replacing the large single wheel used on some of the Farr 40s.

A major change from the old 40 and other new similar-sized boats is the inclusion of a carbon Lewmar winch pedestal that can be engaged for speedy spinnaker hoists and drops as it has an overdrive gear for ultra-fast grinding; and it's connected via a T-drive to the primaries either side. The cockpit is uncluttered, as are the decks, thanks to all running rigging led below via dedicated tunnels.

As I found out during our race, all cockpit controls are well spaced out, giving crew plenty of room to operate. Behind the tiller, the main track runs fully athwartships with sheeting running forward either side to oversized carbon Lewmar 50s, while the traveller line is embedded below. A pair of L48s control the running backstays - located farther down the mast to give more forestay leverage - and near the offset main hatch are a set of wide-bodied L60 primaries with starboard halyard L48 winch, a single set of jammers nicely positioned nearby. Farr 400 OD rules state only port roundings, hence the starboard jammers. Having raced the 40s on various occasions and finding myself stuck halfway down the main hatch, I definitely prefer the layout of offset main hatch and jammers to one side. Other good ergos include the mainsheet trimmer sitting beside the boom vang line that runs on a block from the cockpit sole along with Cunningham as well.

The wide cockpit sole is grippy, has some chocks to give footholds and the drop-down footbars along both of the rounded coamings are functional. Extra weight saving is via composite stanchions, as strong as stainless steel, but something owner Matt Allen had a battle convincing Australian safety authorities about.

DECK AND RIG
The low-profile deck means the vang is well clear, making it much easier for crew to cross over, while smooth gunwales allow comfortable hiking. Decks are also clean as the jib track runs across the cabin top, which also nicely closes the slot with the addition of barber haulers. The foredeck sliding hatch is large and offset to port with a carbon roller on its lip for fast kite drops. Another advantage with the offset hatch is a clean path aft for sail changes, avoiding the mast.

The South African-built Southern Spars Grand Prix carbon mast is held up by EC6 carbon rigging for lightness and strength, while halyard locks are used on the headsails. The shrouds are angled outboard and the forestay is adjustable. For smooth jib hoists there's a turnbuckle block and tack line running aft as well. The extendable bowsprit is centred and controlled by dual tack lines, and for the asymmetrical kites there are retrieval line fittings as well. The bowsprit actually points down, which may not look pretty combined with the reverse sheer, but does prevent the ingress of water when it retracts.

The sailplan has a square-headed main and 105 per cent jib, with limited numbers of running sails (15m² bigger than the Farr 40) permitted in the one design class rules. The sail wardrobe on Ichi Ban was an Ian Short carbon main and jib with North Sails asymmetricals, so gone are the Farr 40 poles.

"This boat sails so fast on the angles, we don't need a symmetrical and pole like my old Farr 40," explained Allen as we readied the boat. OD class rules allow your own sailmaker, but a sail button system will limit the wardrobe (and cost!) per season.

HULL AND FOILS
Reflecting the challenging global market several yacht companies have chosen to trim costs by building in cheaper labour markets, as Farr have done in Dubai with the 400. Premier Composites in Dubai have a large operation, building not just the new 400 but several other raceboats including a Farr rival, the Carkeek HP40 IRC that has been built to the new High Performance Rule (HPR). "I'm watching the development of this new HPR rule in the States with considerable interest," says Allen.

The 400's lightweight hull is built utilising SP Systems carbon infusion, using highly precise five-axis milling, leading to very low tolerances - the first three hulls have been reported to be within 3kg of each other, which enhances the one design aspect of these replacements for the iconic Farr 40.

The keel is partially retractable using the primary winches and pedestal, which is handy for shallow marina berths (but is heavily bolted down when deployed, so no juddering would be expected). It's made of a high antimony lead bulb, with iron fin encased in a composite fairing for minimal friction.

CONTAINER FIT
Portability is an important feature of the Farr 400, with two-piece mast and detachable lifting keel (reducing draft from 9.51ft to 6.50ft) and rudder. This means the 400 can fit into an open topped 40ft container on a dedicated cradle that allows the hull to be rotated onto its side for shipping once the keel and rudder have been removed. The two-part Southern Spars carbon mast also fits within the same container footprint. In Ichi Ban's case she was shipped with keel off to Hamilton Island Race Week this year and knowing Allen's credentials, I wouldn't be surprised if she goes farther afield.

BELOW DECKS
Stepping down onto the large keel box reveals a spartan interior. The keel box is heavily laid-up and has a single strong point for lifting the entire boat. As you'd expect on a Grand Prix raceboat the interior is bare but with rounded mouldings in pleasant white and red, increasing natural light. Two sections divide the area, with four pipe cots aft and forward through the open bulkhead a dedicated sail locker and plinth for the chemical toilet. The main cabin has plenty of headroom and space for crew to kit-up in. For Category 2 compliance there's a galley module that clips into the starboard side near the companionway, with two-burner stove and sink. For navigation Ichi Ban had a Garmin plotter clamped to a bracket to starboard under the cockpit and the power switchboard portside. Access to the Volvo Penta saildrive is either side of the companionway bulkhead but fairly cramped. Quadrant access and Jeffa steering gear linkages are back here as well.

The keel stepped mast is strongly supported by a huge crossbeam with hefty carbon chainplates integrated into the gunwales and the spar has a hydraulic jack for adjustment. Further structural integrity comes from other small crossbeams and longitudinal stringers acting as open bilges to prevent water sloshing around. These bilges also give more headroom. This kind of strong build in such a performance package has earned the boat the moniker of "offshore sportsboat", which I'd say is apt and should give prospective owners plenty of choices for campaigns.

RACING ON SYDNEY HARBOUR
The fun factor was clearly evident on the F400 in the CYCA Winter Series race with Sydney Harbour giving us its average wind pressure - about 12kts after gusting to 25 - for much of the two-hour race. Operating the runners went without dramas, there's plenty of space at the transom and the inward angled winches allow you to put ample purchase on them from inboard. When winding, I kept my eye on the forestay tension so it didn't exceed four tonnes.

The beat towards the Harbour Bridge had us mixing it with First 40s and 45s, but a clean hoist - thanks to the pedestal's overdrive gear mechanically doing the job of a mastman - set us up quickly for the downwind leg. Another clever feature with the integrated pedestal to primary setup is allowing the jib to be trimmed from the windward rail. We sped nicely to double digits, passing many boats and even mixed it in the lighter conditions with the TP52 of Bob Steel. Our only blemish came at the bottom mark near Manly when a foul-up with the kite retrieval line put it in the water, but it was stashed below easily thanks to that big forehatch with roller bar. On the upwind leg in fickle conditions, we suffered for our choice of No.4 headsail, but the B&G mast jumbos still showed healthy numbers - 7.6kts SOG
in the 10-knot breeze - but maybe only a knot up on her predecessor.

"Reaching and running under IRC, we will do well but windward legs perhaps not so well," commented Allen. He added that Ichi Ban has been clocked at more than 20kts off the wind.

Tacking along the eastern shore showed the nimble handling of the Farr 400, with tight angles and good acceleration out of the turn as the four-tonne hull powered-up quickly. Getting the weight to windward was also easily done thanks to the uncluttered cockpit and cabin top.

The Farr 400 is undoubtedly the kind of raceboat that brings a smile to the helmsman's face and the word fun was a recurring one when chatting to Matt Allen about his new boat. "This is a very easy boat to sail," he explained. "It's very forgiving, thanks to the deep keel and bulb so you can do almost anything, including have plenty fun!"

Specifications: Farr 400

PRICED FROM
$509,803

GENERAL
MATERIAL: Carbon/epoxy sandwich
TYPE: Keelboat
LENGTH: 11.8m (overall);
11.11m (waterline)
BEAM: 3.42m
DRAFT: 2.9m (keel down);
1.98m (keel up)
WEIGHT: 3920kg; 2180kg (ballast)

CAPACITIES
CREW: 8
FUEL: 60lt
WATER: 75lt

ENGINE
MAKE/MODEL: Volvo Penta D1-30
TYPE: Diesel saildrive
RATED HP: 27.3
DISPLACEMENT: 1.13lt
PROP: Foldable two-blade Gore racing prop

SAILS
SAIL AREA: 102m² main and jib
(keel up), 235m² (keel down);
133m² asymmetric

SUPPLIED BY
Vicsail,
d'Albora Marina,
Rushcutters Bay, NSW, 2027
Phone: (02) 9327 2088
Website: www.vicsail.com; www.farr400.com

From Trade-a-Boat magazine Issue 431, Sept-Oct 2012. Photos: Kevin Green; Farr Design.